615/616 Series High Accuracy Heavy-Duty Pressure Transducers I 615-10-1-1-8-8

• Vacuum ranges through 0 psig to 1,45,000 psig; absolute ranges from 0 psia to 15 psia through 0 psia to 300 psia
• Current and voltage outputs available
• 316 and 17-4PH Stainless Steel wetted parts

• CE compliant to suppress RFI, EMI and ESD
• Ideal for applications including construction, hydraulics & pneumatics, laboratory & test equipment, power generation, stamping & forming presses and transportation

NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.Reverse polarity, over-voltage and short circuit protectionIngress Protection (IP65)

• SS Threaded Orifice - 615 Only (ST8)
• G 1 Weld-on Adaptor - 616 Only (G1)
• G 1/2 Weld-on Adaptor - 616 Only (G1/2)

These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.

In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.

• Resist clogging and are self-cleaning
• Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
• Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
• Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"​​​​​​

• Cost effective solution to protect expensive instrumentation
• Increases gauge readability by smoothing out pressure surges, pulsations and spikes
• 5 basic elements available for each snubber to accommodate specific application needs
• Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
• Exotic materials or intermediate disc grades available
• Provides long service life with no moving parts to wear out
• Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2

• Protect the instrument from the damaging effects of high temperature steam
• Recommended for use in all steam applications
• Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF

• Temperature ratings: 15,000 psi at 200 ºF and 3000 psi at 1000 ºF
• Used with gauges and gauge valves to adjust the line of sight
• Rotates 360º to allow the connected instrument to be positioned in the desired direction
• The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
• All 316 Stainless Steel construction
• Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
• Also available with 1/4" NPT connections, same specifications apply
• Weight approximately 0.8 lb.