NOSHOK 200 Series Pressure Transducer 0-6000 psig 0.25% Accuracy 0-10 Vdc Output 1/4" NPT Male
200-6000-2-5-2-7
Description
Pressure Transducer, 0 psig to 6000 psig, 0.25% Accuracy (BFSL), 0 Vdc to 10 Vdc Output, 1/4 NPT Male, Mini-HirschmannNOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.NOSHOK Digital Indicators provide local indication for pressure, level and temperature transmitters.NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.Reverse polarity, over-voltage and short circuit protectionIngress Protection (IP65)These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.≥5000 Ω for 0 Vdc to 5 Vdc, 1 Vdc to 5 Vdc, and 1 Vdc to 6 Vdc outputs
≥10,000 Ω for 0 Vdc to 10 Vdc and 1 Vdc to 11 Vdc outputs
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.≥5000 Ω for 0 Vdc to 5 Vdc, 1 Vdc to 5 Vdc, and 1 Vdc to 6 Vdc outputs
≥10,000 Ω for 0 Vdc to 10 Vdc and 1 Vdc to 11 Vdc outputs
- Resist clogging and are self-cleaning
- Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
- Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
- Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
- Cost effective solution to protect expensive instrumentation
- Increases gauge readability by smoothing out pressure surges, pulsations and spikes
- 5 basic elements available for each snubber to accommodate specific application needs
- Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
- Exotic materials or intermediate disc grades available
- Provides long service life with no moving parts to wear out
- Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
- Protect the instrument from the damaging effects of high temperature steam
- Recommended for use in all steam applications
- Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF
Product Specifications
| Connection Type | MNPT |
|---|---|
| Electrical Connection | Mini-Hirschmann |
| Manufacturer | NOSHOK |
| Signal Output | 0 Vdc to 10 Vdc, 3-Wire |
Markets
- Industrial Automation
- Transportation
- Food and Beverage Manufacturing
- Oil and Gas
- Marine
- Mobile Equipment
- Water and Wastewater
Features/Benefits
- Committed to aligning with customers' needs and challenges
- Establishing seamless partnerships by exceeding expectations in value, quality and customer support
- Vast value added benefits
- Engineered with state of the art technology
- Instrumental industry pioneers
Applications
- Heating, ventilation, and air conditioning (HVAC)
- Hydraulics & pneumatics
- Injection molding machines
- Railroad equipment
- Stamping & forming presses
Prop 65 Warning
<p>WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. For more information go to <a href="https://www.P65Warnings.ca.gov" target="_blank">P65Warnings.ca.gov</a></p>
Looking to include this part in a kit or subassembly? We can help!
Receive hundreds of parts in a pre-assembled kit with only one part number. Start saving time and labor managing your inventory today!
Control inventory accuracies and forecasting by becoming a member of the Vendor Managed Inventory Program!
Our Certified Connector Specialists will work with you to track your quantity levels, identify shortages, replenish your inventory, provide training, and answer your questions.
Write Your Own Review