noshok 200-60-1-2-2-7 Pressure Transducer 0-60 psig 0.5% Accuracy 0-5 Vdc Output 1/4 NPT Male Mini-Hirschmann

Pressure Transducer, 0 psig to 60 psig, 0.5% Accuracy (BFSL), 0 Vdc to 5 Vdc Output, 1/4 NPT Male, Mini-HirschmannNOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.NOSHOK Digital Indicators provide local indication for pressure, level and temperature transmitters.NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.Reverse polarity, over-voltage and short circuit protectionIngress Protection (IP65)These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.

In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.≥5000 Ω for 0 Vdc to 5 Vdc, 1 Vdc to 5 Vdc, and 1 Vdc to 6 Vdc outputs
≥10,000 Ω for 0 Vdc to 10 Vdc and 1 Vdc to 11 Vdc outputs

• Resist clogging and are self-cleaning
• Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
• Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
• Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"

• Cost effective solution to protect expensive instrumentation
• Increases gauge readability by smoothing out pressure surges, pulsations and spikes
• 5 basic elements available for each snubber to accommodate specific application needs
• Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
• Exotic materials or intermediate disc grades available
• Provides long service life with no moving parts to wear out
• Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2

• Protect the instrument from the damaging effects of high temperature steam
• Recommended for use in all steam applications
• Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF