300 Series Brass Case Liquid Filled Pressure Gauges I 25-300-15000-psi/bar

• High quality, heavy-duty liquid filled gauge
• Vacuum and compound ranges through 0 psi to 15,000 psi
• Die cast Brass case with natural Brass finish
• Copper alloy or 316 Stainless Steel and Brass wetted parts

• Automotive
• Construction
• Hydraulics & pneumatics
• Mining
• Stamping & forming presses
• Transportation

316 Stainless Steel Coiled Safety Tube

• Dual scale metric dials in psi/bar, psi/kPa and psi/kg/cm² 
• Other scales are available for specific sizes and ranges, such as single scale bar and kPa, refrigerant scales and altitude scales
• Customized special dials such as non-standard metric scale, tons of ram, lbs. of force, etc. are available in small quantities (as few as one piece) on some NOSHOK gauges

Please consult the factory for availability.

• Resist clogging and are self-cleaning
• Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
• Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
• Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"​​​​​​

• Cost effective solution to protect expensive instrumentation
• Increases gauge readability by smoothing out pressure surges, pulsations and spikes
• 5 basic elements available for each snubber to accommodate specific application needs
• Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
• Exotic materials or intermediate disc grades available
• Provides long service life with no moving parts to wear out
• Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2

• Protect the instrument from the damaging effects of high temperature steam
• Recommended for use in all steam applications
• Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF

• Temperature ratings: 15,000 psi at 200 ºF and 3000 psi at 1000 ºF
• Used with gauges and gauge valves to adjust the line of sight
• Rotates 360º to allow the connected instrument to be positioned in the desired direction
• The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
• All 316 Stainless Steel construction
• Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
• Also available with 1/4" NPT connections, same specifications apply
• Weight approximately 0.8 lb.

• Chrome Adaptor Ring (25-13-1-CHROME-AR)
• Rubber Case Protector (25-123459-0-RCP)
• Certificate of Cleaning (COCL)
• Certificate of Conformance (COC)

Glycerin or silicone could result in a spontaneous chemical reaction or explosion when combined with strong oxidizing agents including, but not limited to, chlorine, oxygen, hydrochloric or nitric acid, and hydrogen peroxide. Do not use glycerin or silicone filled gauges or accessories in these types of service. Consult factory for application assistance.

This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.Dynamic Pressure
The working pressure should be limited to 60% of the dial range

Static Pressure
The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial rangeNOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.